Skip to content
Recipok Help Center

Time clock: clock in with a badge or PIN, absences and monthly report

Free extension

Record your team’s working hours: clock in on a tablet in the bakery with a badge or PIN, sealed marks, holidays and leave, and the monthly report ready to sign.

What it is for

If you have employees, the law in many countries requires you to record what time each person starts and finishes every day, and to keep it for years (in Spain, four). A sheet on the wall or a notebook works until the day the labour inspectorate asks about one particular week two years ago, or someone says they stayed an extra hour and there is no way to prove otherwise.

The Time clock module keeps that record inside Recipok. Your team clocks in on a tablet in the bakery with their operator badge or their PIN, every mark is sealed with the server time and any correction leaves a trace. At the end of the month you get each person’s report ready to sign, plus the CSV for your payroll advisor. You also keep holidays, leave and public holidays in the same place.

Before you start

  • Switch it on in Extensions, Time clock card, Enable for free button. Only the account owner can enable extensions. See Extensions. Once it is active you will see the Staff section in the side menu, with Clock-in terminal, My day and, if you are a manager, Time clock.
  • The people who clock in are the users of your account. If someone does not have a user yet, create one first. See Users and roles.
  • To clock in with a badge, print each person’s operator QR badge. It is the same one already used for weighing. See Operator QR badge.

Step 1 · Set your company’s rules

Go to Staff › Time clock, Holidays & settings tab:

  • Working week: tick the days you work. They count for the expected hours and for deducting holidays.
  • Default holiday days per year: applied to each person when you enrol them; you can change it later in their record.
  • Track breaks: adds the break and return buttons. Breaks are deducted from the time worked.
  • Allow clocking from the user's own session (web or mobile): without this, people can only clock in at the terminal. With it, you can Require location when clocking from the session.
  • Also ask for the PIN when clocking with the badge: a badge can be lent; a PIN cannot.
  • Day cut-off hour: a mark before this hour counts for the previous day. Designed for the bakery’s night shifts.

In the Company holidays block, add national, regional and local public holidays, and the days you close. They do not count as working days and do not use up holidays.

Step 2 · Enable the time clock for each person

In the Employees tab, at the bottom, you will find Company users not enrolled. Click Enable time clock for each person who needs to clock in. Then, in the Enrolled in the time clock table:

1

Give them a PIN

In the PIN column, click Set and type 4 to 8 digits. The PIN cannot be looked up later: if someone forgets it, you give them a new one.

2

Issue their badge

In the QR badge column, click Issue badge and then Print. If it gets lost, Regenerate creates a new one and the old one stops working.

3

Enter their hours and shift

With Edit you set their Weekly hours, their Holiday days per year and, if you like, their Shift for each day. The shift is optional and lets you compare clocked time with expected time.

Step 3 · Set up the terminal in the bakery

On a tablet or computer by the door, log in with a bakery user and open Staff › Clock-in terminal. Leave it open: it goes back to the start screen by itself after each mark.

Staff › Clock-in terminal
07:58
Server time · marks are sealed and cannot be altered
▣
1Scan your operator badge
With the hand reader, or the tablet camera
2Or tap your name and type your PIN
● Adriana Yamila ● Jordi Marta
Hello, Yamila · Out   3Clock in
The bakery terminal: badge, or name and PIN, and one big button for each mark.
  1. 1With the hand scanner or the camera, the badge identifies the person instantly.
  2. 2Without a badge, you tap your name and type your PIN. The green dot shows who is in.
  3. 3Recipok only offers the mark that comes next: clock in if you are out, break or clock out if you are in.

Each person can see their hours for the month and their holiday balance, and request days off in Staff › My day, with the Request holidays / leave button.

Step 4 · Check the day and fix what is missing

The Today tab shows you Who is in and which days were left without a clock-out.

Staff › Time clock › Today
Time clock
1In now 3 On break 1 Open days 1 Chain integrity Intact
EmployeeStatusSince
AdrianaIn06:02
JordiOn break10:15
2Open days: a clock-out is missing
Marta · yesterday · clock-in 14:00   Time 22:00 Reason: Forgot to clock out Add clock-out
The Today tab: who is in and which day was left without a clock-out.
  1. 1The counters update with every mark made at the terminal.
  2. 2A manager adds the missing clock-out, with a reason. Recipok never makes up the time.

In the Marks tab you can look up any period, Add mark, Correct or Void. A reason is always required, and it stays in the Audit trail next to the original value.

NoteVoiding does not delete: the mark stays struck through and the day is calculated without it. During an inspection you can see what was there and who changed it.

Step 5 · Holidays, sick leave and other leave

  • The requests your team makes from My day arrive in the Absences tab, under Pending requests. Click Approve or Reject, with a comment if you like.
  • With Record absence you enter sick leave, holidays or other leave yourself. It is approved straight away.
  • In Holiday balance you see how many days each person has taken and how many they have left.

Step 6 · The monthly report and your payroll advisor

In the Reports tab, pick the person and the month. You see each day with its marks, the time worked, the breaks and the expected time.

Staff › Time clock › Reports
Employee: Adriana ▾ Month: November ▾ 1PDF to sign
DayMarksWorkedExpected
Mon 306:00 – 10:00 · 10:30 – 14:007 h 30 min7 h 30 min
Tue 406:02 – 10:01 · 10:31 – 14:057 h 33 min7 h 30 min
Wed 506:00 – 2Open day—7 h 30 min
3Download CSV
The month’s report, day by day, with the PDF to sign and the CSV for your payroll advisor.
  1. 1The PDF has room for the signatures of the company and the employee.
  2. 2A day without a clock-out stands out straight away, before anyone signs.
  3. 3The CSV has every mark of the period, one per line, for your payroll advisor or for Excel.

Tips

  • Put the terminal tablet at the bakery entrance, in plain sight, and always leave it on the clock-in screen.
  • Check the Today tab at the end of each shift. Fixing a forgotten clock-out on the same day is easy; a month later, nobody remembers.
  • Sign each person’s PDF when you close the month and keep it: it is the first thing an inspector asks for.

Frequently asked questions

Do I have to record working hours?
It depends on your country. In Spain, since 2019, the law (art. 34.9 of the Workers’ Statute) requires every company with employees to record each person’s start and finish time every day, and to keep that record for four years. The labour inspectorate can ask for it at any time. Many countries have similar rules: check yours with your labour advisor.
Can someone change a time without anyone noticing?
No. Every mark carries the server time and a fingerprint chained to the previous one. A correction made in Recipok is logged in the Audit trail with who made it, when and why, next to the original value. If anyone edited the database from outside, Chain integrity would switch to Broken.
What happens if someone forgets to clock out?
Recipok never makes up the time. The day shows up under Open days: a clock-out is missing and a manager adds the clock-out with a reason, which stays in the audit trail.
Do I need a special reader or tablet?
No. Any tablet or computer with a browser will do. You can clock in by tapping your name and typing your PIN, by reading the badge with the camera, or with a USB hand scanner, the same one you use for weighing. See Operator QR badge.
Can my staff clock in from their phone?
Only if you allow it in Holidays & settings with Allow clocking from the user’s own session (web or mobile). You can also require their location when they clock in.
Does it cost anything?
Anyone who already uses Recipok with a role clocks in at no cost, on any plan. For people who only clock in there is the Clock-only role, which does not take a user seat: every plan, Free included, comes with 3, and from the fourth on each costs €0.89/month (€8.90/year). You switch it on in one click from Extensions.