Skip to content
Recipok Help Center

Production equipment: machines, batches and additive limits

Paid extension

Register your machines (dough mixers, planetary mixers, blast chillers) with their real capacity, set limits on additives and get each production order broken down batch by batch, with weighing that warns when someone goes over.

What it is for

Every machine in the workshop has a limit: the dough mixer, the planetary mixer, the blast chiller. When production doesn’t fit in a single batch, someone splits the recipe by hand next to the machine, with the calculator on their phone and the five-in-the-morning rush. With additives, a mistake is expensive: a bread improver “at 1%” is not the same worked out on the flour as on the finished product, and the health inspector measures on the product.

The Production equipment module does those sums for you. You register your machines with their real capacity, each recipe knows how many batches it needs and what limit each additive has, and the production order comes out broken down batch by batch, with weighing that warns you, or simply won’t let you carry on, when someone goes over. It is designed for bakeries and for pastry workshops: bread, viennoiserie, sourdoughs and pre-ferments, but also the doughs, creams and batters that go through dough mixers, planetary mixers and blast chillers. It is a paid extension, paid yearly, and you can try it free for 15 days.

Before you start

  • Subscribe to the extension in Extensions, Production equipment card, Contract button. If you want to try it first, click Try free for 15 days: no card, no commitment; then it switches off by itself and your data is kept. Only the account owner can subscribe to extensions. See Extensions.
  • The batch breakdown happens in production orders, so you need a plan that includes them. See Production orders.
  • Have your recipes created with their ingredients. See Create a recipe.

Step 1 · Tell Recipok what counts as flour

Everything else depends on this: the baker’s percentage, the limits read against the flour and the capacity of machines quoted in kilos of flour. And the name doesn’t always tell you: “T65”, “Manitoba” or “Very strong white” are flours, while almond flour in a pastry kitchen perhaps shouldn’t count.

  • When you switch the module on, Configuration › Production equipment shows To begin: what counts as flour in your workshop?. Recipok lists the ingredients in the flour family and those that look like flour by name even though they are filed under another family. Go through the list, mark Not flour on anything that isn’t and click Mark as flour. If you’d rather do it later, click I will do it later.
  • Each ingredient stores its Flour contribution on its sheet, Production equipment tab: 100% if it is a flour, half for a sourdough at 100% hydration, and so on.
  • Sourdoughs and pre-ferments that are recipes don’t need marking: their flour is worked out automatically from their own ingredients. You can force a different value if you need to.

Step 2 · Add your machines

In Configuration › Production equipment, Workshop machinery block, click Add machine and fill in:

  • Name and Type (spiral mixer, planetary mixer, blast chiller…).
  • Maximum capacity and That capacity is in: Kilos of flour or Kilos of dough, whichever the plate says.
  • Minimum load: below it the machine doesn’t work properly. Leave it at 0 if you don’t want a warning.
  • Site, if you work with several, and Available, which you can untick while a machine is being repaired.

The Show weights in kilos switch changes how weights are shown in recipes and production orders. The data is still stored the same way.

Step 3 · Set limits on additives

On the ingredient sheet, Production equipment tab, Dosage limit block:

  • Maximum: the percentage that can’t be exceeded. Leave it empty if the ingredient has no limit.
  • Read against: Over the flour, Over the dough, Over the finished product or Whatever the recipe says.
  • It is a legal limit: legal limits for additives are stated on the finished product. When this is ticked, Recipok always works it out on the finished product, whatever the recipe says, and blocks the weighing when someone goes over.
  • Block the weighing when it is passed: for a limit that isn’t a legal one. Left unticked, the operator sees the warning and can carry on.
  • Where the limit comes from: the supplier’s technical sheet or the regulation. It’s what you’ll be asked for in an audit.
Note1% of the flour lets in more bread improver than 1% of the finished product, because the flour weighs less than the whole dough. That is why a legal limit is never recalculated over the flour.

Step 4 · Prepare the recipe

Open the recipe and go to the Production equipment tab:

1

Choose the machine

In Machine, pick the machine this dough is made in. Recipok works out the Flour base, the Total dough and how many Batches it takes.

2

Decide the split

In Split, Equal batches divides production into equal parts; Fill and remainder fills the machine and leaves whatever is left over for the last one. If the last batch falls below the minimum load, Recipok tells you and suggests splitting it into equal parts.

3

Check the percentages and limits

In Maximum % are read you choose the basis for this recipe’s limits (over the flour, by default). With Formulate in baker’s % you see each ingredient as a percentage of the flour. If anything goes over its maximum, the line turns red with the Over tag.

Recipes › Sourdough loaf › Production equipment
Production equipment
1Machine: Spiral 1 · 80 kg flour ▾
2Split: Equal batches ▾
Flour base 250 kg Total dough 442.5 kg Batches 4 Each one 62.5 kg of flour per batch
IngredientQuantity% of flourMaximum
T65 flour225 kg90%—
Sourdough sub-recipe50 kg20%—
Water160 kg64%—
Salt5 kg2%—
3Bread improver2.5 kg1%1% of flour
A sourdough loaf: 250 kg of flour in an 80 kg spiral mixer comes out in 4 equal batches.
  1. 1The assigned machine sets how much dough fits in each batch.
  2. 2Equal batches or “fill and remainder”: Recipok warns you if the last one falls short.
  3. 3Each additive with a limit shows its maximum; if it goes over, the line turns red.

The flour in the sourdough counts too: in the example, its 50 kg at 100% hydration contribute 25 kg of flour, which together with the 225 kg of T65 make up the 250 kg base.

Step 5 · Produce batch by batch

Create the production order as usual. The Batches block appears on the order:

1

Work out the batches

Click Work out batches. Each batch comes out as a sheet of its own (“Batch 1 of 4”) with how much of each ingredient goes into it and its maximum, already worked out for that batch.

2

Weigh that batch

Click Weigh this batch. Guided weighing asks only for that batch’s quantities, with their tolerance margin, and the Weighed column fills in as you go.

NoteIf an additive goes over its maximum, Recipok warns you (“Above the recommended maximum”) or, if the limit blocks, doesn’t record the weighing and tells you how much to take out.
3

Move on to the next one

When every line in a batch has been weighed, the batch switches to Weighed on its own. When all the batches are weighed, the production order line receives the total weighed.

Production orders › Sourdough loaf
Batches · 4 batches · Spiral 1
Batch 1 of 4 62.5 kg flour 1Weighing
IngredientQuantityWeighedMaximum
T65 flour56.25 kg✓ 56.24 kg—
Sourdough12.5 kg✓ 12.51 kg—
Water40 kg——
Salt1.25 kg——
2Bread improver0.625 kg—0.625 kg · 1% of flour
3Weigh this batch
The sheet for the first batch halfway through weighing: each quantity is for this batch, not for the whole production.
  1. 1Each batch has its own status: pending, weighing or weighed.
  2. 2The bread improver’s maximum is worked out on the flour in this batch.
  3. 3Guided weighing asks only for what goes into this batch.

What doesn’t change once it has started

  • The sheets are saved exactly as they were worked out. If someone changes the recipe halfway through production, the quantities on the production floor don’t move.
  • You can click Recalculate as long as nothing has been weighed. From the first weighing on, the sheets reflect what is being done and are no longer recalculated.
  • The production report prints each additive’s maximum next to its line.

Tips

  • Start with two or three doughs you make every day and check that the number of batches matches what your team actually does.
  • Always fill in Where the limit comes from for additives with a limit: on inspection day it saves you hunting for the technical sheet.
  • If a dough always leaves the last batch short, try equal batches before changing the quantity to produce.

Frequently asked questions

Do I have to redo my recipes?
No. The module works on the recipes you already have, with their ingredients, costs, allergens and labels. Baker’s percentage is another way of looking at them, not another recipe.
Why does it matter whether the capacity is in flour or in dough?
Because manufacturers quote machines both ways, and the two figures differ by about a third. A spiral mixer rated at 80 kg of flour takes quite a lot more than 80 kg of dough. Check the machine’s plate and choose the matching option in That capacity is in.
What happens if I change the recipe once the production order is under way?
Nothing on the sheets: the batches are saved exactly as they were worked out, so the team never sees quantities change halfway through production. As long as you haven’t started weighing, you can click Recalculate; from the first weighing on, the sheets are locked.
Do I need a connected scale?
No. You can type the weight in by hand in guided weighing. If you connect a scale, the weight comes in on its own. See Scales and weighing.
What happens to my data if I switch off the extension?
It is kept. Only the Production equipment tabs are hidden until you switch it on again.